Brands

How to Cross Railroad Tracks on Motorbike



How to Cross Railroad Tracks on MotorbikeRailroad tracks can be intimidating to new riders, and even experienced riders need to treat them with respect. But crossing them is easy if you know how. Most important Attack them from a perpendicular angle cross them at 90 degrees to the way they run, or as close as you can to that. This may mean you need to swerve in your road lane, cross the tracks, and then swerve back.

Stay on the gas while you cross them. Better still, slow before the tracks, and then gas it as you cross. Why? You’ll lighten the front end so you maintain more steering authority, and the tracks won’t grab the front wheel.


Finally, weight the pegs. You don’t have to stand upright, but lifting your butt an inch (2.5 cm) above the seat turns your legs into a live part of the bike’s suspension, and pushes your weight/contact point lower into the chassis (where the pegs join the frame). Keep a firm grip on the handlebar and look ahead. Congrats! You’re safely on the other side.

More Tips


   How to Cross Railroad Tracks on Motorbike
How to Cross Railroad Tracks on MotorbikeRailroad tracks can be intimidating to new riders, and even experienced riders need to treat them with respect. But crossing them is easy if you know how. Most important Attack them from a perpendicular angle cross them at 90 degrees to the way they run, or as close as you can to that. This may mean you need to swerve in your road lane, cross the track ... more
   How to Stand Up on Your Motorcycle Easily...!
How to Stand Up on Your Motorcycle Easily Over and over and over in the riding section of The Total Motorcycling Manual you’ve heard us tell you to stand up on the footpegs when riding. A motorcycle set up for proper control will have the foot-pegs pretty close to directly under your hips—dirt-bikes are probably the best example, and cruisers with their pegs set way o ... more
   Ryder Use Your Motorcycle Center Stand
Conspiracy theorists will tell you that the lack of center-stands on today’s bikes is a plot to make you take it to a dealer for service. In reality it’s for cost savings, weight reduction, and increased ground clearance. If you do have one, here's how to use it. Start by standing to the left of the bike, and take hold of the left handlebar grip with your left hand. Straigh ... more
   Learning About Your Motorbike Into a Turn
Motorcycles stop faster and accelerate harder when they’re straight up and down, because that’s when the tires put the most footprint to the road surface. Suspension components also work best in the pure vertical plane—leaning the bike over puts side loads on them, encouraging binding and frame flex. But we need to lean bikes over in order to turn. What ca ... more
   How to Change Your Motorbike Grips
Changing a grip looks like such an easy job, but often proves more frustrating than trying to give an angry Siamese cat a bath. But it doesn’t have to be that way if you try these pro tips. The easiest way to remove an old grip is to slice it off with a razor blade. Want to reuse it instead? Pull it away from the bar and spray a healthy dose of contact cleaner in the gap. Work fast, a ... more

New Added Bikes